cbd-packaging-requirement-california

CBD Packaging / Labeling Requirements California | The Ultimate Guide

Are you facing certain difficulties with CBD product labeling and Packaging? Well, of course! CBD is a worldwide growing market. If you're operating your business in California State and you stepped into the zone. Then our guide for labeling and packaging CBD products will aid you much.

Below guidelines sourced from notification proposed by California Cannabis Agencies dated Jan 16, 2019, If you're operating a licensed Cannabis work, you must have to follow Packaging and Labeling regulations to deal with all CBD and CBD-infused products sold within California.

Packaging and labeling Recommendations By

California Cannabis Agencies

It would help if you considered labeling and Packaging a CBD product beforehand, presenting it to your customer. The regulations put forward by the California Department of Public Health (CPDH). The updated notification holds labeling and Packaging recommendations for Cannabis (flower rolls and Pre-rolls) and Cannabis (extract) manufactured goods.

To help individuals further with compliance, the notification holds Master Packaging and Labeling FAQ's, tap on the highlighted bar to review the relevant resources.

Also Read: Guide to Indiana CBD Packaging Requirements

General Guidelines for Packaging:

guidelines for packaging

CBD packaging - opaque containers

All cannabis flowers, pre-rolls, and manufactured cannabis goods must pack in compliance with the following requirements stated by The Medicinal and Adult-Use Cannabis Regulation and Safety Act (MAUCRSA)

  • There must be a tamper-evident seal:

A tamper-evident seal reveals whether the product's contents are initially touched or not it's a plastic seal or sticker around the lid. In case the seal is not attached with the protective cover of the product, a consumer has visible evidence of its tempering.

  • The product packaging must bear a reseal-able property:

An ideal product packaging design holds a reseal-able feature (such as lids, adhesive closure, box top closures, etc.), recommended for products with multiple usages. This will ensure its safety from any external contamination through light, moisture, oxygen, etc., further; it prevents the risk of child consumption.

  • Consider only opaque Packaging for CBD-infused edible products:

It is difficult to see the inside contents of the product from an opaque packaging, unlike transparent. Opaque bottles such as Amber coloured preferred for beverages (e.g. syrups or energy boosters) and oral medicines (e.g. bottles for tablets). Such a type of Packaging designates to aid child-resistance.

  • The packaging property must bear Child Resistance:

It means that the package design is challenging to open for children aged fewer than 5. Smoking dried hemp and Marijuana flower buds and relevant cannabis products can cause severe hazardous impacts on them thus it must bear a Child Resistant Packaging (CRP)

Child-resistant Packaging

child-resistant-packaging-box

What's more to know about CRP?

The package must say about initial CRP if it intends for single-use. In contrast, the initial CRP tag generally implies flower and flower only pre-rolls, inhaled concentrates (vape and cartridges), and single-serving cannabis products.

The product must hold a lifetime CRP statement if it facilitates multiple servings 'through a single product'. It means the Packaging is child-resistant as long as the product constituents end up. This tag is supported by edibles, consumed concentrates (tinctures and capsules, etc.), and suppositories.

The Packaging needs to get certified as 'Child Resistant' by relevant authorities (by PPPA act )

The container's closures or caps must seal with a pry-off crown technique.

Further, the Packaging needs a four mil thicker protective plastic covering, must be correctly heat sealed with no tab, dimple, or flap that discourages easy opening.

For every Packaging

It should have

Packaging recommendations can satisfy in any of the layers if the product holds a multi-layered packaging procedure.

Please make sure the products and their constituents safeguard from external toxic elements

It shouldn't have

Product packaging must not show any resemblance or identical to marketed children products

The packaging outlook must differ from those of non-cannabis food products.

Guidelines for labeling Cannabis (Flower and Flower- Only Pre-Rolls)

Guidelines for labeling Cannabis Pre rolls

CBD Pre-Roll Packaging

All cannabis flower and flower-only pre-rolls must label properly, and all the essential details regarding the product must fall under primary and informational panel categories.

Primary Panel:

The first thing that communicates with your regular and potential buyers is your brand identity, which displays through the Primary Panel at the front of your Packaging. This is the part of the label which includes three key features.

The 'principal display panel' must patently display product identity:

It contains a short description of the product's common or usual name from which a person can easily distinguish the product type, for instance, flower or pre-rolls.

Net weight/ Net quantity of contents must forefront the Packaging:

The Net content measurements have to display in metric (say grams) and U.S customary units (say ounces), as per guided by regulations.

The Universal Symbol of California must associate the PDP Panel:

The Universal symbol of California indicates the country of origin on the cannabis commodities. This has to mention in black and range at least 0.5"*0.5" by size. Tap here to upload the symbol!

Informational Panel:

When consumers desire more information, they ultimately review the informational panel. This part can state elsewhere on the product besides the PDP panel. It generally includes the following data.

It is mandatory to include UID number to this label:

Receive your UID number from the California Cannabis Track-and-Trace system. Once you hold it, this requirement becomes necessary to get included. Moreover, it prohibits creating a placeholder UID number, instead of leaving a blank place is recommend unless you load your UID number.

Include license name and contact details or website.

The legal business name or the registered DBA of the concerned licensee must be mention, along with the phone number or contact details. These worthy details on the informational panel added to your inner Packaging of CBD products, will let consumers easily communicate their concerns with the manufacturer or retailer.

Mention caution or warning statement if any:

Explicit if any statement provided by the Government that associates the product say for medical cannabis products highlight 'FOR MEDICAL USE ONLY'. Also, bold and capitalized fonts recommend.

Depending upon the applicability, a Prop 65 warning must state clearly if aware that its chemical composition can cause any serious harm on exposure to certain individuals such as cancer, birth defects, or any reproductive harm.

Manufacturing date must disclose on products exterior:

The date on which the finished product manufactures significantly impacts its shelf presence. Also, the manufacturing date must go by month, day, and year.

Cannabinoid content of ingredients needs to declare on the informational panel:

For all CBD products, there must be a full declaration of ingredients. In contrast, the cannabinoid contents (such as concentration or amount of THC and CBD) present in the container are generally expressed in percentage (%).

For every label

It shouldn't have

Do not mention the country name of California unless all cannabis sources relate to inland cultivation.

Information imprinted about the product and its content prohibits that misleads, for instance, labeling a product 'organic' while not certified.

The exterior labeling design must not include any cartoon or comic characters, kid's images, or words that interest minors.

Any health claims mustn't include if it doesn't support the available criteria of peer-reviewed evidence.

It should have

The recommendation is to use English as a medium with an easily readable font; at least 6 points sized.

During labeling, individuals must concern the layout of information in a clear and legit way.

All the essential labeling information must be visible and securely affixed at the exterior layer of Packaging.

Adding an authentic piece of information other than recommended ones unless it is not misleading is permissible.

Guidelines for Labeling Cannabis Manufactured Products:

Guidelines for labeling Cannabis products

CBD-infused Products Range

Any authorized individual must verify these important recommendations included in their CBD-infused edible, cosmetic, and ailments curing product labels.

Like earlier, these basic labeling requirements will place on Packaging's outer layer, which falls under two below-listed categories, based on the part of the Packaging where it belongs.

Primary display Panel:

All the information regarding product identity (for instance, edible gummies), Net weight g or oz. or fl oz. and ml by volume, and Universal symbol should display typically at the front and top of the outer layer of Packaging.

Informational display panel:

For rest of the details apart from PDP, such as Registered Name and place of business, contact details or a Q.R. code, Ingredient declaration, warning or caution statements, and Disclosure of material facts such as health claims any other desired information will list on the Information display panel.

Some additional labeling details regarding manufactured cannabis products:

There might be two key concerns regarding it.

If your product holds multiple packaging layers,

The basic PDP need apart from mentioning it to the other layers is mandatory to infuse on the inner container which is in direct physical contact with the product.

Any inhaled Cannabis product layout (such as cartridges, vape, shatter, or wax) must exhibit the Universal symbol, whereas for Non- inhaled Cannabis products ( such as edibles, tinctures, topical, etc.) the word Cannabis-infused must include along with product identity, a universal symbol, and net weight or volume details.

If your product packaging holds too little space to get listed all the required information on the outer layer.

Suppose your tincture bottle is too small to fit in all the required details, to fix this for the leftover information to present using a leaflet, hangtag, peel-back labels, and inserts. It is important to note that Q.R. codes, websites, and other methods are not part of supplemental labeling; they serve as sources of contact to deal with product complaints and inquiries.

For every label

It should have

Make sure you display all the information in a readable format with clear and legit wordings using English as a medium language along with a 6 point font size or more.

Confirm all suggested labeling requirements display on Packaging's outer layer, whereas an insufficient package space could supplement by hangtags and inserts etc.

It Shouldn't have

All its constituents should source by the country then it can state California as the product's place of origin.

Any inappropriate and unauthorized statement about products such as false health claims is an act of violation of the labeling requirements. This could even lead you to federal prosecution.

You must confirm that each of your edible cannabis products does not hold any sort of picture; rather, it comes in an opaque covering. This initiative is an attempt by the state to reduce the risk of children's attraction towards the product.

There goes a label restriction that you cannot market your product as an alcoholic beverage, as notified by the Bureau of Cannabis Control regulations.

user-image
Author - Noah Nicholls

Noah Nicholls is a full-time Writer, Traveler, and Marketing Expert who is Currently Working for CBD-Boxes. Noah Nicholls writing relates to a range of subjects such as CBD and health.

whatsapp-icon

Copyright © 2023 CBD-Boxes All Right Reserved.